Back
Calculation methods
Trace de Trail offers you, according to your subscription, several methods to calculate the distance and the elevation gains of your track.

For an accurate estimate of the distance and elevation gains, it is important to create a quality track with a good density of points. For each track, you have the average distance between two points with a smiley as an indicator !

Warning ! Having a good density of points is a necessary condition for a quality track (with some exceptions), but this does not guarantee that the trace is accurate as shown in the second example below:

If your track is from a gpx file with elevations, you can use them to calculate the distance and elevation gains of your track.

Using a gpx file that you obtained with your watch, your GPS or your smartphone is not a guarantee of quality. The GPS signal can be degraded in the valleys, but also in the city between two buildings !

In addition, there are two types of GPS:

• GPS with a barometric altimeter : use a threshold of 3 m to calculate the elevation gains
• GPS without barometric altimeter : use a threshold of 10 m to calculate the elevation gains

The treshold of ascent/descent is the minimum elevation difference taken into account for the calculation of the elevation gains/losses

If the use of the elevations of your gpx generates a very irregular profile with a succession of peaks which do not correspond to the reality, use rather the elevations of a DEM !

You will often manually modify your track created from a gpx file : to complete the track, clean the gpx ... If you delete points, there will be no problem. On the other hand, if you add points, they will not have elevation. In this case you will be able to :

• ignore the points without altitude: this is possible if the points you have added are few and distributed
• replace the missing elevations with elevations from DEM : be careful and observe the profile to note possible offset between the two sources of elevations

On Trace de Trail you have several DEM to get the points elevations of your track.

• IGN DEM: only in France (very good quality)
• ASTER DEM: international

In order to define the points for which an altitude will be requested, Trace de Trail will densify or lighten your track to obtain a homogeneous distribution of points. For this, a resampling parameter is used. Its default value is 30 m : it is this value that gives the best results.

A threshold is also used to calculate the elevation gains with a default value of 3 m.

When creating a trace in rapid mode, the ASTER DEM method with a threshold of 3 m is used. Nevertheless, if you have imported a gpx with elevations, these are kept and the calculation method can be modified in a second time.